Starship Wall Mount for Vintage Star Wars X-Wing, Falcon, TIE Fighter &
MoreUSD $6.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This listing is for custom made mounting systems for displaying your vintage Star Wars ships and vehicles on your wall. Scroll to the end to see the full list of ships. Vintage vehicles are considered the vehicles produced for the 3.75" figures from 1978 to 1984. Some of these fit the 90's era POTF and later vehicles - see the list below for known compatibility as well as installation instructions/tips.
These wall mounts are all Low Profile: they hold your ship as close to the wall as possible.
You can see a video overview of the mounts and basic installation here: https://youtu.be/kJu84qiSi8M
SAVE MONEY, combine shipping! Add all items from my store to your cart BEFORE paying, and eBay will automatically combine shipping for you. You do NOT need to request an invoice if you are a US buyer (even though eBay may still suggest it).
You can display your vintage Star Wars vehicles with the following wall mounts: Imperial Shuttle - fits the 1984 vintage, the 2002 ROTJ, and the 2006 Saga Collection Imperial Shuttle. You can display the shuttle with wings open or in the up position. It requires the front handle to be in place. If you are missing the handle, I have replacements available here.
the Millennium Falcon - comes with a latch/hook to hold the back canopy in place. Place the front landing gear in bracket, align holes, and insert support rod. Re-attach clip. Fits the vintage (1978), the 1995 electronic POTF Falcon, and the 2003 Original Trilogy Falcon. If you have the BMF, click here.
Slave 1 - fits vintage and POTF. Simply hooks through handle.For AOTC or OTC Slave 1s with a 2001 date stamp, use this mount: https://www.ebay.com/itm/135740004361For the larger TVC Slave 1 with a 2010 date stamp, use this mount: https://www.ebay.com/itm/134997774853For the smaller Slave 1s with a 2012 date stamp, use this mount: https://www.ebay.com/itm/137196535104
A-Wing Fighter - fits vintage Droids A-Wing and POTF. Extend landing gear and hook into rear landing gear opening.
X-Wing Fighter - fits vintage standard (1978), vintage Battle Damaged (1978), Power Of the Force (1995), 2004 Original Trilogy, and the 2015 Poe Dameron X-Wings. See this listing for modern X-Wings.
Y-Wing Fighter - fits the vintage 1983 Y-Wing, 1999 POTF Y-Wing, 2004 OTC Y-Wing, 2007 TRU Y-Wing, and the 2012 Vintage Collection Y-Wing.
B-Wing Fighter - fits the vintage and the 2001 Power of the Jedi B-Wings. This one positions the B-Wing as if it's flying to the left, flat against the wall. Very low profile. Requires the landing gear to be extended. Place the rectangular landing gear in the hole in the bracket, then close in the hooks from either side to latch it in place.
Flyout B-Wing Fighter - fits the vintage and the 2001 Power of the Jedi B-Wings. This one positions the B-Wing as if it's flying out of the wall. Much higher profile. Can be positioned in any orientation. This one can be a tight fit and takes more effort to install. You can see a video of the installation here: https://youtu.be/CjQdV4OUhtE
Rebel Transport - requires the escape hatch to be removed. Rebel Transport must face up. Bracket hooks into escape hatch opening. Best to attach completely assembled (all top hatches in place).
Snowspeeder - fits vintage and POTF
Landspeeder - fits vintage only, will NOT fit the POTF landspeeder.
Twin Pod Cloud Car - I find the canopies want to open if you face it up, so I recommend facing it down. Simply set the lip of the engine on lower hook, and lower the top latch down into the opposite lip of the engine to lock in place.
Imperial Cruiser/Troop Transporter - There is a screw on the vehicle that needs to get centered in the slot on the bracket - see pic. Slide nose end in first to engage hook, then set level against the wall.
Speeder Bike - The clip on the bracket snaps into place around the "exhaust port" cylindrical shape in the bottom middle of the speeder.
TIE Fighters - this will fit 3 versions of the TIE Fighter - vintage standard, vintage Battle Damaged, and POTF TIE.
I'm no longer making the Darth Vader or TIE Interceptor spacers. I have new models that use acrylic brackets for the larger winged TIEs (as well as brackets covering almost every TIE from vintage to modern) here:Click here for more TIE Bracket options.
The standard TIE mount does fit all vintage TIES, but for the Vader and Interceptor, additional spacers are needed to accommodate the depth of the wings. If you are handy, you can make your own spacers (or see the link above). For Darth Vader's TIE Fighter, you will need to make a 3" extension. For the TIE Interceptor, you will need to make a 3/4" extension. These can be made from wood, or 3D printed - however you want. The regular TIE hanger does not need any additional spacers for the standard or Battle Damaged TIEs.
I include an easy self tapping screw-in drywall anchor and screw with each Starship Wall Mount. All you need is a drill or even just a screwdriver. You may be tempted to use Command Strips instead of screwing into the wall: DON'T DO IT! Or do it at your own risk. Command Strips (while an excellent product) have a high potential to fail at some point. Do you want to take the chance? I used them on some Speeder Bikes till one of them fell.
I have put a lot of effort into developing and testing these mounts. For the most part, they are heavily over-engineered. I personally use every mount with my own collection. Having said that - these are use at your own risk! (I'm not responsible for toys crashing to the ground...)
I do tweak the designs as I identify opportunities for improvement or the ability to speedup the 3D printing process - so the items you receive may look slightly different than the pictures and videos show.
About 3D Printed items: They may have minor visual defects from the printing process. This is normal and does not impact function. Plus, you can't really see these brackets from behind the vehicles.
Visit my eBay store for other hard to find vintage Star Wars parts, repair kits, and vehicle wall mounting hangers!
About Galactic Collector: I specialize in designing and creating high-quality 3D printed parts for vintage Star Wars toys. My expertise lies in crafting custom wall-mount brackets to securely and stylishly display vintage vehicles. Additionally, I offer a range of reproduction parts designed to closely resemble the originals while being affordable and practical for display purposes. My goal is to provide accessible solutions that enhance the look of your vintage collection.
These wall mounts are all Low Profile: they hold your ship as close to the wall as possible.
You can see a video overview of the mounts and basic installation here: https://youtu.be/kJu84qiSi8M
SAVE MONEY, combine shipping! Add all items from my store to your cart BEFORE paying, and eBay will automatically combine shipping for you. You do NOT need to request an invoice if you are a US buyer (even though eBay may still suggest it).
You can display your vintage Star Wars vehicles with the following wall mounts: Imperial Shuttle - fits the 1984 vintage, the 2002 ROTJ, and the 2006 Saga Collection Imperial Shuttle. You can display the shuttle with wings open or in the up position. It requires the front handle to be in place. If you are missing the handle, I have replacements available here.
the Millennium Falcon - comes with a latch/hook to hold the back canopy in place. Place the front landing gear in bracket, align holes, and insert support rod. Re-attach clip. Fits the vintage (1978), the 1995 electronic POTF Falcon, and the 2003 Original Trilogy Falcon. If you have the BMF, click here.
Slave 1 - fits vintage and POTF. Simply hooks through handle.For AOTC or OTC Slave 1s with a 2001 date stamp, use this mount: https://www.ebay.com/itm/135740004361For the larger TVC Slave 1 with a 2010 date stamp, use this mount: https://www.ebay.com/itm/134997774853For the smaller Slave 1s with a 2012 date stamp, use this mount: https://www.ebay.com/itm/137196535104
A-Wing Fighter - fits vintage Droids A-Wing and POTF. Extend landing gear and hook into rear landing gear opening.
X-Wing Fighter - fits vintage standard (1978), vintage Battle Damaged (1978), Power Of the Force (1995), 2004 Original Trilogy, and the 2015 Poe Dameron X-Wings. See this listing for modern X-Wings.
Y-Wing Fighter - fits the vintage 1983 Y-Wing, 1999 POTF Y-Wing, 2004 OTC Y-Wing, 2007 TRU Y-Wing, and the 2012 Vintage Collection Y-Wing.
B-Wing Fighter - fits the vintage and the 2001 Power of the Jedi B-Wings. This one positions the B-Wing as if it's flying to the left, flat against the wall. Very low profile. Requires the landing gear to be extended. Place the rectangular landing gear in the hole in the bracket, then close in the hooks from either side to latch it in place.
Flyout B-Wing Fighter - fits the vintage and the 2001 Power of the Jedi B-Wings. This one positions the B-Wing as if it's flying out of the wall. Much higher profile. Can be positioned in any orientation. This one can be a tight fit and takes more effort to install. You can see a video of the installation here: https://youtu.be/CjQdV4OUhtE
Rebel Transport - requires the escape hatch to be removed. Rebel Transport must face up. Bracket hooks into escape hatch opening. Best to attach completely assembled (all top hatches in place).
Snowspeeder - fits vintage and POTF
Landspeeder - fits vintage only, will NOT fit the POTF landspeeder.
Twin Pod Cloud Car - I find the canopies want to open if you face it up, so I recommend facing it down. Simply set the lip of the engine on lower hook, and lower the top latch down into the opposite lip of the engine to lock in place.
Imperial Cruiser/Troop Transporter - There is a screw on the vehicle that needs to get centered in the slot on the bracket - see pic. Slide nose end in first to engage hook, then set level against the wall.
Speeder Bike - The clip on the bracket snaps into place around the "exhaust port" cylindrical shape in the bottom middle of the speeder.
TIE Fighters - this will fit 3 versions of the TIE Fighter - vintage standard, vintage Battle Damaged, and POTF TIE.
I'm no longer making the Darth Vader or TIE Interceptor spacers. I have new models that use acrylic brackets for the larger winged TIEs (as well as brackets covering almost every TIE from vintage to modern) here:Click here for more TIE Bracket options.
The standard TIE mount does fit all vintage TIES, but for the Vader and Interceptor, additional spacers are needed to accommodate the depth of the wings. If you are handy, you can make your own spacers (or see the link above). For Darth Vader's TIE Fighter, you will need to make a 3" extension. For the TIE Interceptor, you will need to make a 3/4" extension. These can be made from wood, or 3D printed - however you want. The regular TIE hanger does not need any additional spacers for the standard or Battle Damaged TIEs.
I include an easy self tapping screw-in drywall anchor and screw with each Starship Wall Mount. All you need is a drill or even just a screwdriver. You may be tempted to use Command Strips instead of screwing into the wall: DON'T DO IT! Or do it at your own risk. Command Strips (while an excellent product) have a high potential to fail at some point. Do you want to take the chance? I used them on some Speeder Bikes till one of them fell.
I have put a lot of effort into developing and testing these mounts. For the most part, they are heavily over-engineered. I personally use every mount with my own collection. Having said that - these are use at your own risk! (I'm not responsible for toys crashing to the ground...)
I do tweak the designs as I identify opportunities for improvement or the ability to speedup the 3D printing process - so the items you receive may look slightly different than the pictures and videos show.
About 3D Printed items: They may have minor visual defects from the printing process. This is normal and does not impact function. Plus, you can't really see these brackets from behind the vehicles.
Visit my eBay store for other hard to find vintage Star Wars parts, repair kits, and vehicle wall mounting hangers!
About Galactic Collector: I specialize in designing and creating high-quality 3D printed parts for vintage Star Wars toys. My expertise lies in crafting custom wall-mount brackets to securely and stylishly display vintage vehicles. Additionally, I offer a range of reproduction parts designed to closely resemble the originals while being affordable and practical for display purposes. My goal is to provide accessible solutions that enhance the look of your vintage collection.
Price type
IN STOCK
OUT STOCK
.
